You are reading the article Root Sprint Samsung Galaxy Note 2 Sph updated in September 2023 on the website Climeeviet.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested October 2023 Root Sprint Samsung Galaxy Note 2 Sph
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
GUIDE: ROOT SPRINT SAMSUNG GALAXY NOTE 2 SPH-L900
Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.
Do not use the procedures discussed here on any other variants of Galaxy Note 2 (including the Galaxy Note 2 variant at AT&T, LTE, Verizon, T-Mobile, US Cellular and other International variants) or any other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVER
You must have proper and working driver installed on your windows computer to be able to successfully root your Sprint Samsung Galaxy Note 2.
In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.
► SAMSUNG DEVICES DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONSDOWNLOADS
Download the CF Auto Root file given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).CF AUTO ROOT FILE STEP-BY-STEP GUIDE
Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing the CF Auto Root, which might delete internal sd card too, your files will remain safe on PC.
Extract/Unzip the CF-Auto-Root file, CF-Auto-Root-t0ltespr-t0ltespr-sphl900.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:
Disconnect the Sprint Galaxy Note 2 from PC if it is connected.
Boot your Sprint Samsung Galaxy Note 2 into Download Mode:
Power off your phone first and wait for 6-7 seconds after display is off
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Sprint Galaxy Note 2 as said above in ‘Before you begin..’ section.
If you have already installed driver, then uninstall them and reinstall back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot your phone and PC and then try again.
Load the firmware file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps. (Step 6 and Step 7)
When you get PASS! message, your device will restart automatically. You can then disconnect your phone from PC.
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Sprint Galaxy Note 2 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Sprint Galaxy Note 2 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.
NOTE: It may happen that your phone doesn’t automatically boot into recovery and root your phone. In that case follow the following above procedure except that in Step 7, Auto Reboot option is un-checked and then the instructions below:
Pull out the battery and re-insert it.
Boot your Sprint Galaxy Note 2 into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home.
Now, this will start the rooting process and will reboot the phone automatically when the process is done.
It was easy to root your Sprint Galaxy Note 2 with CF Auto Root Tool, right? Let us know how you plan to use root privileges on your Sprint Galaxy Note 2.
Your suggestions and queries, if any, are most welcomed!
You're reading Root Sprint Samsung Galaxy Note 2 Sph
Update the detailed information about Root Sprint Samsung Galaxy Note 2 Sph on the Climeeviet.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!